Bar

Lift Systems

HNC

A Series

A Series lift has been specially developed for large vehicles. Its main features are fast installation, high lifting power and weight ratio, reliability and serviceability. Since it is mounted under the floor, it provides maximum flexibility in the floor layout.
HNC

BBO Lift

BBO models are double-arm lifters that are fully automatic and controlled by a spiral cable handset. The horizontally folding, anti-slip mesh platform makes this series different from others. The quiet and easy electrohydraulic system provides easy and safe access for wheelchairs, completely eliminating the difficulties of entering and exiting vehicles. These types of elevators are designed to provide excellent visibility to the driver. All movements such as lifting and turning are operated by hand controller Carolift 90 can be installed in many different vehicles, such as station wagons, minivans or full-size pickup trucks.
HNC

BBV Lift

BBV MODELS ARE FULLY AUTOMATIC AND SPIRAL CABLE DOUBLE ARM LIFTS CONTROLLED BY HAND DEVICE. Vertically folding, non-slip mesh platform makes this series different from others. quiet and easy electrohydraulic system allows easy access of wheelchairs to special vehicles This type of elevators does not restrict the rear visibility of the vehicle driver when the elevator is located at the rear door. All elevators in this series comply with current European regulations and also comply with electromagnetic compatibility rules. It has a 2 year warranty.
HNC

E Series

E-Series wheelchair lifts are a special lift application implemented by HNC. It is a simple, effective and reliable solution. It has a lifting capacity of up to 400 kg. These wheelchair lifts, which have double parallel arms, have a very balanced structure. At the same time, since its platform has a low slope, it can easily go up to the top level. Widths vary from 740 mm to 900 mm, lengths from 1050 mm to 1500 mm. Width and length suitable for your vehicle are preferred.
HNC

Folding Platform

As the name suggests, this platform is stored by folding horizontally. Thanks to its folding feature, it creates a longer platform than normal. This product is especially suitable for users who want a longer platform.
HNC

Divided Platform

When this lift is kept closed, it separates from the middle to two sides. Due to its separated edges, it allows the door on which it is installed to be used in the closed position. In this way, emergency exits are not blocked.
HNC

Thick Platform

It is the most well-known version of wheelchair lifts. The platform opens and closes with vertical movements in the classical order.
HNC

EP Series

The EP 300 cassette was developed as an undercarriage lift and is specifically designed for side door entry of a wide range of medium-sized vehicles. This underfloor lift is very slim designed to enable side installation. EP SERIES is fully automatic, easy to use and its stainless steel structure guarantees durability. It has a manual start system via an auxiliary emergency pump in case of power outage.
HNC

UVL Series

The UVL-Series are proven elevator lifts for commercial use. They are mounted on the step or other special compartment of the bus, keeping them out of sight and out of the way until the call is made. UVL-Series wheelchair lifts are fully automatic and operated by an attendant using a hand-held remote control. In case of vehicle electrical failure, the UVL Series will continue to operate thanks to the manual backup system. EP SERIES is fully automatic, easy to use and its stainless steel structure guarantees durability. It has a manual start system via an auxiliary emergency pump in case of power outage.